ā12-08-2022 02:32 AM
Hello,
I thought, i understand SSO/NSR/NSF and how to use it, but as soon as I tried to configure BGP for NSR with SSO feature, nothing worked as expected. Please explain to me, what's wrong with this configuration.
I'm going to configure NSR BGP Session on SSO plattform with NSF aware peer (I tried also with NSF unaware peer, it didn't changed anything). Configuration was tested on Cat6807 VSS / 9600 SV and 9500 SV platforms in SSO mode
CAT9600#sh ver | in XE Software|Model Number Cisco IOS XE Software, Version 17.03.05 Model Number : C9606R Model Number : C9606R | CAT9600#sh redundancy Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = sso Active Location = Switch 2 Current Software state = ACTIVE Standby Location = Switch 1 Current Software state = STANDBY HOT | CAT9600#show license summary network-advantage (C9600-NW-A) 2 IN USE dna-advantage (C9600-DNA-A) 2 IN USE |
CAT6807-2T#sh ver | in bin|6807
| CAT6807-2T#sh redunda Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = sso Active Location = slot 1/3 Current Software state = ACTIVE Standby Location = slot 2/3 Current Software state = STANDBY HOT | CAT6807-2T#show license Index 1 Feature: MACSec_Encryption Index 2 Feature: CTS Index 3 Feature: TEST_FEATURE_1 Period left: 4 weeks 2 days License Type: Evaluation License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: None Index 4 Feature: TEST_FEATURE_2 Period left: 1 hour 0 minute License Type: Evaluation License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: None |
CAT9500#sh ver | in XE Software|Model Number Cisco IOS XE Software, Version 17.03.05 Model Number : C9500-24Y4C Model Number : C9500-24Y4C | CAT9500#sh redundancy Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = sso Active Location = slot 1 Current Software state = ACTIVE Standby Location = slot 2 Current Software state = STANDBY HOT | CAT9500#sh lice sum network-advantage (C9500 Network Advantage) 2 IN USE dna-advantage (C9500 24Y4C DNA Advantage) 2 IN USE |
I tried to configure NSR with NSF aware and unaware peer, here are the most important session parameter
CAT6807-2T#sh ip bgp vpnv4 all neighbors 11.0.0.1 (GR on peer disabled) | CAT6807-2T#sh ip bgp vpnv4 all neighbors 11.0.0.1 (GR on peer enabled) |
BGP neighbor is 11.0.0.1, remote AS 65020, internal link Description: to Core-RR BGP state = Established, up for 00:31:45 Neighbor capabilities: Route refresh: advertised and received(new) Four-octets ASN Capability: advertised and received Address family VPNv4 Unicast: advertised and received Graceful Restart Capability: received Remote Restart timer is 120 seconds Address families advertised by peer: VPNv4 Unicast (was not preserved Enhanced Refresh Capability: advertised and received Multisession Capability: Stateful switchover support enabled: NO for session 1 For address family: VPNv4 Unicast Index 1, Advertise bit 0 1 update-group member Address tracking is enabled, the RIB does have a route to 11.0.0.1 Connections established 1; dropped 0 Transport(tcp) path-mtu-discovery is enabled Graceful-Restart is disabled SSO is disabled Connection state is ESTAB, I/O status: 1, unread input bytes: 0 Event Timers (current time is 0x12F1A33D0): Timer Starts Wakeups Next Retrans 38 0 0x0 TimeWait 0 0 0x0 AckHold 37 36 0x0 SendWnd 0 0 0x0 KeepAlive 0 0 0x0 GiveUp 0 0 0x0 PmtuAger 4 3 0x12F21BF14 DeadWait 0 0 0x0 | BGP neighbor is 11.0.0.1, remote AS 65020, internal link For address family: VPNv4 Unicast |
BGP Configuration is very simple:
CAT6807-2T#show run | sec er bgp
router bgp 65020
!
template peer-session IBGP-CORE-RR
remote-as 65020
transport path-mtu-discovery
update-source Loopback0
ha-mode graceful-restart disable (optional NSF unaware session)
exit-peer-session
!
bgp router-id 11.0.0.8
bgp log-neighbor-changes
bgp graceful-restart
no bgp default ipv4-unicast
neighbor 11.0.0.1 inherit peer-session IBGP-CORE-RR
neighbor 11.0.0.1 description Core-RR
!
address-family ipv4
exit-address-family
!
address-family vpnv4
bgp nexthop trigger delay 8
neighbor 11.0.0.1 activate
neighbor 11.0.0.1 send-community both
exit-address-family
Each and every guide for my platforms and versions (for example this one for IOS-XE 17) says, that I can configure "ha-mode sso" for neighbors in direct or in peer template or global bgp preference "bgp ha-mode sso [prefer] ", but in my case none from 3 test platforms knows those commands. It's not like it doesn't work, they are just unknown - what do I do wrong?
here one example more - sso option is unavailable, also it's not a hidden command:
(config-router-stmp)#ha-mode ?
graceful-restart graceful-restart for this peer
Solved! Go to Solution.
ā12-19-2022 11:33 AM
If someone is still looking for the right answer - I checked feature navigator; bgp ha-mode sso is not available on cat6800 or cat9500/9600
You can find in every Catalyst VSS/SV documentation NSR support, but it doesnāt specify supported protocols and IOS-XE documentation for BGP NSR isnāt for catalyst switches. At the same time you will find thousands of NSR related documents for catalyst 6K/9K, so itās pretty easy to get confused
ā12-10-2022 09:03 AM
Does nobody use NSR for BGP sessions?
ā12-10-2022 09:48 AM
NSF/NSR need before config routing between two L3 device, need device have two RP, two RP meaning two control plane.
in C6000 need two SUP.
ā12-11-2022 01:46 AM - last edited on ā12-20-2022 01:24 AM by Translator
Sure, I posted also
show redundant
output in my initial post. In case you talk about L3 routing between Distribution and core layer, then
so, what is your advice, how would you implement redundancy?
ā12-19-2022 11:33 AM
If someone is still looking for the right answer - I checked feature navigator; bgp ha-mode sso is not available on cat6800 or cat9500/9600
You can find in every Catalyst VSS/SV documentation NSR support, but it doesnāt specify supported protocols and IOS-XE documentation for BGP NSR isnāt for catalyst switches. At the same time you will find thousands of NSR related documents for catalyst 6K/9K, so itās pretty easy to get confused
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide