01-12-2006 05:58 PM - edited 03-03-2019 11:26 AM
Hi,
Im redistributing static routes to EIGRP.Is it possible to block the external EIGRP route update?so that other sites will not receive unneccesary routes.If possible,how can i do that?
Thanks
01-12-2006 06:15 PM
Hello,
You can block specific routes to neighbors using interface-specific distribute-lists.
For example, if you want to block route 10.0.0.0/24 (which is a redistributed static) from being sent over interface eth0, do the following:
access-list 10 permit 10.0.0.0 0.0.0.255
!
router eigrp 20
distribute-list 10 out Ethernet0
You can use this for both external and internal routes.
Hope that helps - pls rate the post if it does.
Paresh
01-12-2006 06:26 PM
Whoops... quick correction. The ACL should be:
access-list 10 deny 10.0.0.0 0.0.0.255
access-list 10 permit any any
Paresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide