11-29-2011 10:28 AM - edited 03-04-2019 02:27 PM
I have to bond 3 T1s between a Cisco 2620 router and a Cisco 6509 (MSFC w/ FlexWan Module).
At another site I have to bond 2 T1s to the same 6509.
Any assistance will be helpful.
Thanks
11-29-2011 12:11 PM
configuration of multilink should look like this.
controller T1 0/0/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
!
controller T1 0/0/1
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
!
controller T1 0/1/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
!
controller T1 0/1/1
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
!
interface Multilink1
ip address 1.1.1.1 255.255.255.252
no cdp enable
ppp multilink
ppp multilink group 1
!
interface Serial0/0/0:0
no ip address
encapsulation ppp
no fair-queue
ppp multilink
ppp multilink group 1
!
interface Serial0/0/1:0
no ip address
encapsulation ppp
no fair-queue
ppp multilink
ppp multilink group 1
!
interface Serial0/1/0:0
no ip address
encapsulation ppp
no fair-queue
ppp multilink
ppp multilink group 1
!
interface Serial0/1/1:0
no ip address
encapsulation ppp
no fair-queue
ppp multilink
ppp multilink group 1Router# show ppp multilinkMultilink1, bundle name is MY-ISPEndpoint discriminator is MY-ISPBundle up for 10w0d, total bandwidth 6144, load 25/255Receive buffer limit 48000 bytes, frag timeout 1000 ms2/3020 fragments/bytes in reassembly list204716 lost fragments, 310561297 reordered474999/517174257 discarded fragments/bytes, 474999 lost received0x256CD0 received sequence, 0x2071C9 sent sequenceMember links: 4 active, 0 inactive (max not set, min not set)Se0/1/1:0, since 10w0dSe0/1/0:0, since 10w0dSe0/0/0:0, since 10w0dSe0/0/1:0, since 10w0dNo inactive multilink interfacesRouter#
11-29-2011 01:08 PM
is this config for the 6509? I am confused with the controllers
11-29-2011 01:10 PM
Multiple are basically formed for serial links when we configure controller for T1 and this would be the config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide