Bridge Group on Routers

[Elie El Amil]

Kindly note that I have the following scenario and I need to configure a bridge group on the two routers:

Head Office: LAN: 192.168.5.0

             WAN: 10.10.10.1

Branch: LAN : 192.168.7.0

        WAN: 10.10.10.2

Noting that I want to add a DHCP server on the Branch LAN with the same IP of the Head Office LAN.

How can I configure the bridge group on the two routers?

Is there any possibility to create a VLANs on the Branch site?

Attached you will find the network Topology.

Thanks in advance.

[paolo bevilacqua]

Do not use bridging because that will only cause you problems.

Use routing as everybody else, and everything will work good and smooth.

[Elie El Amil]

Please note that i have the subnet 192.168.5.0 in head office and i need to put a server in the branch site with the same IP of the subnet of Head Office, so how can i do a routing on the same subnet?

[paolo bevilacqua]

You don't. In the branch office, put a server with the IP of the branch.