cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2541
Views
0
Helpful
4
Replies

c1111 router licensing

nareh84
Level 3
Level 3

hi

 

 

we have got C1111-8PLTELA with ipbase and security license. the firmware which was with the router supported only smart license. because of that we downgraded to c1100-universalk9_ias.16.09.02.SPA.bin. when we check show license, i can see security as permanent but nothing under ipbase. do i have to get PAK for ipbase if i have to get it permanently activated?

 

#show license
Index 1 Feature: appxk9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 2 Feature: securityk9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 3 Feature: ipbasek9
Index 4 Feature: FoundationSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 5 Feature: hseck9
Index 6 Feature: throughput
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: internal_service

 

 

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

The license key for the ipbasek9 package is activated by default. - is this output after upgrade or before upgrade to 16.9.X ?

 

also can you post :

 

show license summary

show license all

show license status

show ver

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello,

 

--> c1100-universalk9_ias.16.09.02.SPA.bin

 

This translates to release Fuji-16.9.2 ED, for which SmartNET is still mandatory. If you want to use Right-to-use licensing, you need a 16.8 release.

hi

 

 

find the attached output of license commands

 

the firmeware which came with router only supported smart licensing and i think this require dna based licensing? so i have downgraded firmware but i can only see security feature license is permanent but not ipbase

 

Thx

 

 

balaji.bandi
Hall of Fame
Hall of Fame

You should see as below : (but looks something went wrong after upgrade, or something not correct while you doing smart License)

 

Quick to resolve is contact license@cisoc.com they are very quick and get you right

 

------------------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9


1#show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbasek9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 2 Feature: securityk9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking products for a $25 gift card