08-10-2010 06:36 PM - edited 03-04-2019 09:22 AM
I have a cisco 1941w with ios c1900-universalk9-mz.SPA.150-1.M2.bin and I am using Cisco CP Express GUI. It tells me that the firewall feature set in unavailable. The IOS image in your router does not support the requested feature.
How do I get CP Express to configure the firewall feature?
Solved! Go to Solution.
08-10-2010 06:41 PM
You need to have the Security license for the firewall features. You can check what license you have with a show version/show license
08-10-2010 06:43 PM
In the command prompt (via console, telnet or ssh) do show license all and post the output here.
Regards,
jerry
08-11-2010 11:59 AM
Like I mentioned earlier, you need a Security license. You currently have only a IP Base license
08-11-2010 12:55 PM
Is that something I need to purchase or is it a download feature set license?
08-11-2010 01:02 PM
You need to purchase the license from a Cisco reseller. The link below
lists the different license options and the part numbers.
http://www.cisco.com/en/US/prod/collateral/modules/ps10598/ordering_guide_c07_557736_ps10538_Products_Data_Sheet.html
08-18-2010 03:02 PM
Contact Cisco Licensing (licensing@cisco.com) and they will send you the license file to install on the device
08-24-2010 07:05 PM
Please post your switch configuration also. The router configuration looks okay.
Regards,
jerry
08-24-2010 07:25 PM
The switch is an HP Procurve switch. Do you still want the switch config?
08-24-2010 07:42 PM
Not really. So in the switch, make sure the trunk port is configure to 802.1q and allow all VLAN's to go through. That is about it.
If it is a Cisco switch the configuration looks like the follow
interface x/x
switchport trunk encapsulation dot1q
switchport mode trunk
HTH,
jerry
08-24-2010 07:59 PM
I wish it was a Cisco switch. HP does things different what they call a trunk is actually an ether-channel of ports.
08-25-2010 06:15 PM
Your ip nat outside is on the wrong interface. It should be on G0/1, not G0/0.
interface g0/0
no ip nat outside
interface g0/1
no ip nat inside
ip nat outside
HTH,
jerry
08-25-2010 07:23 PM
08-10-2010 06:41 PM
You need to have the Security license for the firewall features. You can check what license you have with a show version/show license
08-10-2010 06:43 PM
In the command prompt (via console, telnet or ssh) do show license all and post the output here.
Regards,
jerry
08-11-2010 11:54 AM
08-11-2010 11:59 AM
Like I mentioned earlier, you need a Security license. You currently have only a IP Base license
08-11-2010 12:55 PM
Is that something I need to purchase or is it a download feature set license?
08-11-2010 01:02 PM
You need to purchase the license from a Cisco reseller. The link below
lists the different license options and the part numbers.
http://www.cisco.com/en/US/prod/collateral/modules/ps10598/ordering_guide_c07_557736_ps10538_Products_Data_Sheet.html
08-18-2010 02:27 PM
So I will order the SL-19-SEC-K9 Security License which looks like a paper license. How do I install it on
the router? And does this part number give mu all the feature sets to have firewall and vpn features?
08-18-2010 03:02 PM
Contact Cisco Licensing (licensing@cisco.com) and they will send you the license file to install on the device
08-24-2010 06:54 PM
08-24-2010 07:05 PM
Please post your switch configuration also. The router configuration looks okay.
Regards,
jerry
08-24-2010 07:25 PM
The switch is an HP Procurve switch. Do you still want the switch config?
08-24-2010 07:42 PM
Not really. So in the switch, make sure the trunk port is configure to 802.1q and allow all VLAN's to go through. That is about it.
If it is a Cisco switch the configuration looks like the follow
interface x/x
switchport trunk encapsulation dot1q
switchport mode trunk
HTH,
jerry
08-24-2010 07:59 PM
I wish it was a Cisco switch. HP does things different what they call a trunk is actually an ether-channel of ports.
08-25-2010 06:00 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide