01-23-2023 07:55 AM
Has anyone had success or problems receiving telemetry updates for VRRP configured on C8000V VRRP?
01-23-2023 08:16 AM
how is your config looks like ?
01-23-2023 08:55 PM
-------------------------------------------------------------------------------------------------------------------
router-r1 configuration --- with sample vrrp telemetry message that's sent and contains no VRRP related information
-------------------------------------------------------------------------------------------------------------------
router-r1#show running-config interface GigabitEthernet 4
Building configuration...
Current configuration : 278 bytes
!
interface GigabitEthernet4
ip address 10.1.2.1 255.255.255.0
ip nbar protocol-discovery
negotiation auto
vrrp 123 description tski-vrrp-123
vrrp 123 ip 10.1.2.100
vrrp 123 priority 200
service-policy input WEBUI-MARKING-IN
service-policy output WEBUI-QUEUING-OUT
end
router-r1#show vrrp brief
Interface Grp Pri Time Own Pre State Master addr Group addr
Gi4 123 200 3218 Y Master 10.1.2.1 10.1.2.100
router-r1#
GigabitEthernet4 - Group 123
tski-vrrp-123
State is Master
Virtual IP address is 10.1.2.100
Virtual MAC address is 0000.5e00.017b
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 200
Master Router is 10.1.2.1 (local), priority is 200
Master Advertisement interval is 1.000 sec
Master Down interval is 3.218 sec
FLAGS: 1/1
telemetry-s1#show telemetry ietf subscription 1011 detail
Telemetry subscription detail:
Subscription ID: 1011
Type: Configured
State: Valid
Stream: yang-push
Filter:
Filter type: xpath
XPath: /vrrp-ios-xe-oper:vrrp-oper-data/vrrp-oper-state
Update policy:
Update Trigger: periodic
Period: 1000
Encoding: encode-kvgpb
Source VRF:
Source Address:
Notes: Subscription validated
Named Receivers:
Name Last State Change State Explanation
-------------------------------------------------------------------------------------------------------------------------------------------------------
tel-receiver 01/24/23 04:41:03 Connected
│ 2023-01-24T04:47:13.686+0000 FINE MdtDialoutArgsHandler: Input message is: node_id_str: "router-r1" │
│ 2023-01-23T20:47:13.687268207-08:00 telemetry-col subscription_id_str: "1011" │
│ 2023-01-23T20:47:13.687280593-08:00 telemetry-col collection_id: 8 │
│ 2023-01-23T20:47:13.687297301-08:00 telemetry-col collection_start_time: 1674535633685 │
│ 2023-01-23T20:47:13.687308508-08:00 telemetry-col msg_timestamp: 1674535633685 │
│ 2023-01-23T20:47:13.687324663-08:00 telemetry-col collection_end_time: 1674535633685
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
------------------------------------------------------------------------------------------------
router-r2 configuration --- with sample vrrp telemetry message that's sent and contains no VRRP related information
------------------------------------------------------------------------------------------------
router-r2#show running-config interface GigabitEthernet 2
Building configuration...
Current configuration : 177 bytes
!
interface GigabitEthernet2
ip address 10.1.2.2 255.255.255.0
negotiation auto
vrrp 123 description tski-vrrp-123
vrrp 123 ip 10.1.2.100
no mop enabled
no mop sysid
end
router-r2#show vrrp brief
Interface Grp Pri Time Own Pre State Master addr Group addr
Gi2 123 100 3609 Y Backup 10.1.2.1 10.1.2.100
router-r2#show vrrp
GigabitEthernet2 - Group 123
tski-vrrp-123
State is Backup
Virtual IP address is 10.1.2.100
Virtual MAC address is 0000.5e00.017b
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 100
Master Router is 10.1.2.1, priority is 200
Master Advertisement interval is 1.000 sec
Master Down interval is 3.609 sec (expires in 2.949 sec)
FLAGS: 0/1
Router#show telemetry ietf subscription 1011 detail
Telemetry subscription detail:
Subscription ID: 1011
Type: Configured
State: Valid
Stream: yang-push
Filter:
Filter type: xpath
XPath: /vrrp-ios-xe-oper:vrrp-oper-data/vrrp-oper-state
Update policy:
Update Trigger: periodic
Period: 1000
Encoding: encode-kvgpb
Source VRF:
Source Address:
Notes:
Named receivers:
Name Last State Change State Explanation
---------------------------------------------------------------------------------------------------------------------------------------
tel-receiver 01/24/23 04:41:06 Connected
│ 2023-01-23T20:44:46.469251049-08:00 telemetry-col 2023-01-24T04:44:46.459+0000 FINE MdtDialoutArgsHandler: Input message is: node_id_str: "router-r2" │
│ 2023-01-23T20:44:46.469327035-08:00 telemetry-col subscription_id_str: "1011" │
│ 2023-01-23T20:44:46.469340506-08:00 telemetry-col collection_id: 23 │
│ 2023-01-23T20:44:46.469349830-08:00 telemetry-col collection_start_time: 1674535486456 │
│ 2023-01-23T20:44:46.469358744-08:00 telemetry-col msg_timestamp: 1674535486456 │
│ 2023-01-23T20:44:46.469366862-08:00 telemetry-col collection_end_time: 1674535486456 │
│ 2023-01-23T20:44:46.469374564-08:00 telemetry-col │
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide