10-14-2014 08:43 AM - edited 03-04-2019 11:58 PM
I recently installed a memory license upgrade (FL-8XX-512U1GB) on a c891F ISR. The license install <filename> command reported successful installation. However, a show version command still reports 512MB of memory and the license information doesn't include anything about the memory upgrade license (post reload). Is there any command that shows that the router is, in fact, using the 1GB allowed by the license?
This link contains a table, memory options, that shows the 891F memory upgrade feature option: http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78-519930.html
Solved! Go to Solution.
10-15-2014 01:56 AM
Hi Curtis,
Have you tried "license feature MEM-8XX-512U1GB" command in configuration mode and then wr and reload?
BR,
Jaromir
10-15-2014 01:56 AM
Hi Curtis,
Have you tried "license feature MEM-8XX-512U1GB" command in configuration mode and then wr and reload?
BR,
Jaromir
10-15-2014 11:34 AM
We've sent this router to the customer site, so I'll have to see if we can remote in and run the command. Thanks for the suggestion.
Update: The tech on site issued the "license feature MEM-8XX-512U1GB" and rebooted the router. That resolved the issue.
Thanks for the help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide