ā10-03-2013 02:34 AM - edited ā03-04-2019 09:13 PM
Greetings,
I was wondering if you could replace 2x VWIC3-2MFT-G703 with a 1x VWIC3-MFT-T1/E1 running over clear channel E1 circuits if you configure the following:
A-end:
clock source internal
B-end:
clock source line
The reason for this is to consolidate the VWIC cards in order to migrate the service to a new platform?
Thanks in advance.
Solved! Go to Solution.
ā10-03-2013 04:15 AM
It can be used, however routers on both sides of the circuits will need to be configured for framed, 31 timeslots service.
ā10-03-2013 04:15 AM
It can be used, however routers on both sides of the circuits will need to be configured for framed, 31 timeslots service.
ā10-03-2013 04:22 AM
Yes, I figured I would lose a timeslot of 64kbps on each circuit.
Thank you.
ā10-03-2013 04:23 AM
Thank you for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide