1.
Configure the devices according the diagram.
Run EIGRP protocol in Site 1 and Site 5
Run OSPF protocol in Site 7
Make sure that after completing the configuration
Site 1 and site 5 should communicate each other but
Site 7 should not get any route from Site 1 and site 5.
Verification:
On R1 Router
R1#ping 132.42.42.2
----Should be ping
R1#ping 132.42.42.1
----Should be ping
R1# Ping 143.88.83.36
----Should not Ping
R1# Ping 143.88.83.37
----Should not Ping
On R2 Router
R2#ping 131.42.42.17
----Should be ping
R2#ping 132.42.42.16
----Should be ping
R2# Ping 143.88.83.36
----Should not Ping
R2# Ping 143.88.83.37
----Should not Ping
On R3 Router
R3#ping 131.42.42.17
----Should NOT be ping
R3#ping 132.42.42.16
----Should Not be ping
R3#ping 132.42.42.2
----Should NOT be ping
R3#ping 132.42.42.1
----Should NOT be ping
1 Accepted Solution
Accepted Solutions
