cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
607
Views
5
Helpful
9
Replies

can anyone help on this topology

sivared0001
Level 1
Level 1

123321.png

 

 

1.
   Configure the devices according the diagram.

Run EIGRP protocol in Site 1 and Site 5

Run OSPF protocol in Site 7 

Make sure that after completing the configuration
Site 1 and site 5 should communicate each other but
Site 7 should not get any route from Site 1 and site 5.




Verification:

On R1 Router

R1#ping 132.42.42.2
 
     ----Should be ping  

R1#ping 132.42.42.1
 
     ----Should be ping  


R1# Ping 143.88.83.36

      ----Should not Ping

R1# Ping 143.88.83.37

      ----Should not Ping


On R2 Router



R2#ping 131.42.42.17
 
     ----Should be ping  

R2#ping 132.42.42.16
 
     ----Should be ping  


R2# Ping 143.88.83.36

      ----Should not Ping

R2# Ping 143.88.83.37

      ----Should not Ping


On R3 Router


R3#ping 131.42.42.17
 
     ----Should NOT be ping  

R3#ping 132.42.42.16
 
     ----Should Not be ping 


R3#ping 132.42.42.2
 
     ----Should NOT be ping  

R3#ping 132.42.42.1
 
     ----Should NOT be ping 
1 Accepted Solution

Accepted Solutions

Where are you testing this? Is it Packet Tracer?  Attached the zipped file.

Is not possible to help you this way. We need to see the configuration. 

View solution in original post

9 Replies 9

Where are you testing this? Is it Packet Tracer?  Attached the zipped file.

Is not possible to help you this way. We need to see the configuration. 

see the topology i am supposed to ping from site 1 and site 5 each other without giving any route from site 7 and also not supposed to change anything in topology

 

is there any other way to make communication between site 1 and site 5

I can not see the topology. Can you attach it?

Still can not see anything. Might be my problem, sorry.

 

For PacketTracer file, you need to zip it first.

@Flavio Miranda   did you find the topology? if yes let me know  and find my replies only then you will get what my issue 

Jon Marshall
Hall of Fame
Hall of Fame

 

Are we just doing homework for people now. 

 

This question has already been asked by somebody else - 

 

https://community.cisco.com/t5/routing/routing/m-p/4604950#M366188 

 

Jon

this is me only i am new to this platfrom, accidentally i clicked solved and also new

Review Cisco Networking for a $25 gift card