06-14-2006 08:35 PM - edited 03-03-2019 01:00 PM
Hi guys,
We're using a Cisco 1721 router with WIC-1T connected to a 256kb leased line. We're going to upgrade to 2MB leased line. I'd like to know whether this router can support upto 2MB.
Thanks in advance.
Solved! Go to Solution.
06-14-2006 10:36 PM
Hi
I have seen Cisco 1721 with WIC-1T handling 2Mbps LL.
And i dont feel you will hve some probs getting it conncted or getting it on working mode..
But if you are planning anything inline with VPN then better think off for enough memory on the box.
regds
06-14-2006 10:36 PM
Hi
I have seen Cisco 1721 with WIC-1T handling 2Mbps LL.
And i dont feel you will hve some probs getting it conncted or getting it on working mode..
But if you are planning anything inline with VPN then better think off for enough memory on the box.
regds
06-14-2006 10:41 PM
Hi! Thanks for your reply. I will not be configuring any VPN for this link, so it should be ok.
Thanks again :)
06-15-2006 03:16 AM
Hello,
in addition to the other post, you also might want to check the data sheet for the 1720/21 (scroll down to the bottom where it says 'WAN Interface Specifications (Optional)':
Cisco 1721 and Cisco 1720 Modular Access Routers
Data Sheet
http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a00800920ec.html
HTH,
GNT
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide