04-13-2005 01:30 AM - edited 03-03-2019 09:17 AM
Hello all
I've been battling this issue for two days now and now I'm compelled to ask for help. I'm a t-online subscriber in Germany and I've tried almost every config I could, but the ADSL just doesn't want to connect. Here is the config. I appreciate any helpful insight.
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
memory-size iomem 5
logging buffered 100000 debugging
!
no aaa new-model
ip subnet-zero
!
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool CLIENT
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
lease 0 2
!
!
ip ips po max-ev
no ftp-server write-enable
!
!
!
!
!
!
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Ethernet2
no ip address
shutdown
!
interface BRI0
no ip address
shutdown
!
interface ATM0
no ip address
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode annexb-ur2
pvc 1/32
oam-pvc 0
pppoe-client dial-pool-number 1
!
!
interface FastEthernet1
no ip address
duplex auto
speed auto
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer remote-name redback
dialer-group 1
ppp authentication pap chap callin
ppp chap hostname *****
ppp chap password 7 *****
ppp pap sent-username ******* password 7 *****
ppp ipcp dns request
ppp ipcp wins request
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
ip http server
no ip http secure-server
!
ip nat inside source list 102 interface Dialer1 overload
!
!
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!
control-plane
!
!
line con 0
exec-timeout 120 0
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
access-class 23 in
exec-timeout 120 0
login local
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
end
Thanks for your time.
P.S the shown config I made with CRWS, because I gave up manually trying.
04-13-2005 06:53 AM
Hello,
1. Do not use CRWS
2. For germany t-dsl connectivity you have to use different settings on your ATO0 Int:
!
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 1/32
pppoe-client dial-pool-number 1
!
!
3. We need additional information if it sill doesn't work, ie cabeling, output from "sh run", interface status, output on console, output from "debug ppp authen" ...
regards
Matthias
04-14-2005 03:23 AM
Bingo, right on!, thanks a lot for the help I was battling this problem for the past 8 months (insgesamt). I actually gave up on a 827 configration because of the same problem.
Thanks again
04-14-2005 11:56 PM
hello again
Can you please explain to me why the deutsche Telecom needs a ATM0 sub interface to function instead of just a regular config, such as the one I had.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide