03-29-2011 12:20 PM - edited 03-04-2019 11:54 AM
Hi
We purchased this router with the cisco IOS software installed. I've installed the Vista driver on my win 7 box. I believe that should work. If not, please let me know.
I installed Putty to termainl in and I'm using a USB connection.
I cannot even log into the router.
I thought I was going to see some kind of setup wizard using the CISCO software so I would use a GUI and get things moving.
Can someone please get me started? I've got loads of reference material with command etc. but I just can't connect to the router to make it happen.
thanks in advance.
03-31-2011 06:29 AM
Your question will be best answered on the "WAN Switching & Routing" forum of the larger Cisco Support Community as the 1941 is not part of the Cisco Small Business product portfolio. You can browse to it by clicking here and post your question.
Best Regards,
03-31-2011 09:27 AM
Hi Patricia,
Per Glenn's suggestion I have moved your question to the Wan, Switching, and Rounting area so you do not need to re-post your question.
Best regards,
Cindy Toy
Cisco Small Business
Community Manager
03-31-2011 03:47 PM
What settings do you have for your putty session ?
1. correct port number (comx)
2.9600 baud
3.8 data bits
4. parity None
5. stop bits 1
6. flow control rts/cts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide