Current configuration : 7652 bytes ! ! Last configuration change at 14:43:08 UTC Fri Sep 13 2013 by mickael version 15.1 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname routeur ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings ! no aaa new-model ! crypto pki token default removal timeout 0 ! crypto pki trustpoint TP-self-signed-3481302706 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3481302706 revocation-check none rsakeypair TP-self-signed-3481302706 ! ! crypto pki certificate chain TP-self-signed-3481302706 certificate self-signed 01 xxx quit ip source-route ! ! ! ip dhcp excluded-address 10.10.10.1 ip dhcp excluded-address 192.168.0.61 ip dhcp excluded-address 192.168.0.62 ip dhcp excluded-address 192.168.0.254 ! ip dhcp pool ccp-pool import all network 10.10.10.0 255.255.255.248 default-router 10.10.10.1 lease 0 2 ! ip dhcp pool pool-bureaux-labos network 192.168.0.0 255.255.255.192 default-router 192.168.0.62 dns-server 212.27.40.241 lease infinite ! ip dhcp pool pool-production network 192.168.0.64 255.255.255.192 default-router 192.168.0.126 dns-server 212.27.40.241 lease infinite ! ip dhcp pool pool-materiel network 192.168.0.128 255.255.255.192 default-router 192.168.0.190 dns-server 212.27.40.241 lease infinite ! ! ip cef no ip domain lookup ip domain name yourdomain.com no ipv6 cef ! ! ! ! multilink bundle-name authenticated ! ! ! ! ! ! license udi pid CISCO892-K9 sn FC... ! ! ! ! ! ! ! ! ! ! ! ! ! interface BRI0 no ip address encapsulation hdlc shutdown isdn termination multidrop ! interface FastEthernet0 switchport access vlan 10 no ip address ! interface FastEthernet1 switchport access vlan 20 no ip address ! interface FastEthernet2 switchport access vlan 30 no ip address ! interface FastEthernet3 switchport access vlan 40 no ip address ! interface FastEthernet4 no ip address ! interface FastEthernet5 no ip address ! interface FastEthernet6 no ip address ! interface FastEthernet7 no ip address ! interface FastEthernet8 no ip address duplex auto speed auto ! interface GigabitEthernet0 ip address dhcp ip nat outside ip virtual-reassembly in duplex auto speed auto ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$ ip address 10.10.10.10 255.255.255.0 ip tcp adjust-mss 1452 ! interface Vlan2 ip address 1.2.3.4 255.255.255.0 ! interface Vlan10 ip address 192.168.0.62 255.255.255.192 ip nat inside ip virtual-reassembly in hold-queue 100 out ! interface Vlan20 ip address 192.168.0.126 255.255.255.192 ip nat inside ip virtual-reassembly in ! interface Vlan30 ip address 192.168.0.190 255.255.255.192 ip nat inside ip virtual-reassembly in ! interface Vlan40 ip address 192.168.0.254 255.255.255.192 ip nat inside ip virtual-reassembly in ! ip default-gateway 81.56.134.1 ip forward-protocol nd ! ! ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface GigabitEthernet0 overload ip default-network 81.56.134.0 ip route 0.0.0.0 0.0.0.0 81.56.134.254 ! access-list 1 permit any access-list 23 permit any no cdp run ! ! ! ! ! ! control-plane ! ! ! ! mgcp profile default ! ! ! ! banner exec ^C % Password expiration warning. ----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device and it provides the default username "cisco" for one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session. It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username <myuser> privilege 15 secret 0 <mypassword> Replace <myuser> and <mypassword> with the username and password you want to use. ----------------------------------------------------------------------- ^C banner login ^C ----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco". These default credentials have a privilege level of 15. YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN CREDENTIALS Here are the Cisco IOS commands. username <myuser> privilege 15 secret 0 <mypassword> no username cisco Replace <myuser> and <mypassword> with the username and password you want to use. IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF. For more information about Cisco CP please follow the instructions in the QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp ----------------------------------------------------------------------- ^C ! line con 0 login local line aux 0 line vty 0 4 access-class 23 in privilege level 15 login local transport input telnet ssh line vty 5 15 access-class 23 in privilege level 15 login local transport input telnet ssh ! end | 
