CCX settings

[madhu_mbx]

Hi.. How do I make the WLAN Access Point as CCX enabled? I have Cisco Aironet 1130 AG series & 1230 AG series AP's/

Can some one help me out in doing the settings for ccx?

[purohit_810]

To be enable CCX please use open authentication with EAP..

To open EAP :

authentication open eap_methods

authentication network-eap eap_methods

See on URl:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml

Regards,

Dharmesh Purohit

[madhu_mbx]

Thanks Dharmesh.

Can you please let me know the following?

1. Does Cisco 1131AG series Access Point supports CCX?

2. Is setting up the EAP method, the only change to make it ccx enabled?

3. I would like to capture the Radio measurement messages && beacon frame from the AP. Is this EAP setting will do or should I change any other configuration at the AP?