02-07-2024 01:43 AM - edited 02-07-2024 10:31 AM
I configured the Cisco 1921 DHCP server but does not lease an IP address to the host....
SN: FCZ2138B0MJ
NAME: "CISCO1921/K9
02-07-2024 01:44 AM - edited 02-07-2024 10:27 AM
!
ip dhcp excluded-address 10.1.10.1 10.1.10.10
!
ip dhcp pool Addis-Villa-Sample
network 10.1.10.0 255.255.255.0
default-router 10.1.10.1
dns-server 213.55.96.148 213.55.96.166
domain-name addis-villa.com
lease 7
!
!
no ip domain lookup
ip name-server 213.55.96.148
ip name-server 213.55.96.166
ip dhcp-server 10.1.10.1
!
multilink bundle-name authenticated
!
crypto pki token default removal timeout 0
!
license udi pid CISCO1921/K9 sn FCZ2138B0MJ
!
redundancy
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description Connect-to-ISP
ip address 196.188.1.104 255.255.224.0
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
description Connect-to-ZYXEL-AGG
ip address 10.1.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 196.188.0.1
!
access-list 1 permit 10.1.10.0 0.0.0.255
!
02-07-2024 04:20 AM
Share
Show ip dhcp statistics
Here let me check
MHM
02-07-2024 04:34 AM
Hello @Samuel Berhanu
Try to re enable dhcp service on your router
#service dhcp command under configuration-terminal.
02-07-2024 10:58 AM - edited 02-07-2024 11:00 AM
Info:- Cisco Packet Tracert worked for me but on the physical router it didn't work, what is the issue....
02-07-2024 12:11 PM
Hello
Is it possible you can post the run cfg of the real router, Also a simple topology diagram showing the rtr to client physical connection?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide