Cisco 1921/K9 Router DHCP Problem

[Samuel Berhanu]

I configured the Cisco 1921 DHCP server but does not lease an IP address to the host....

SN: FCZ2138B0MJ

NAME: "CISCO1921/K9

[Samuel Berhanu]

!
ip dhcp excluded-address 10.1.10.1 10.1.10.10
!
ip dhcp pool Addis-Villa-Sample
network 10.1.10.0 255.255.255.0
default-router 10.1.10.1
dns-server 213.55.96.148 213.55.96.166
domain-name addis-villa.com
lease 7
!
!
no ip domain lookup
ip name-server 213.55.96.148
ip name-server 213.55.96.166
ip dhcp-server 10.1.10.1
!
multilink bundle-name authenticated
!
crypto pki token default removal timeout 0
!
license udi pid CISCO1921/K9 sn FCZ2138B0MJ
!
redundancy
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description Connect-to-ISP
ip address 196.188.1.104 255.255.224.0
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
description Connect-to-ZYXEL-AGG
ip address 10.1.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 196.188.0.1
!
access-list 1 permit 10.1.10.0 0.0.0.255
!

[MHM Cisco World]

Share 

Show ip dhcp statistics 

Here let me check

MHM

[M02@rt37]

Hello @Samuel Berhanu 

Try to re enable dhcp service on your router

#service dhcp command under configuration-terminal.

[Samuel Berhanu]

Info:- Cisco Packet Tracert worked for me but on the physical router it didn't work, what is the issue....

[paul driver]

Hello
Is it possible you can post the run cfg of the real router, Also a simple topology diagram showing the rtr to client physical connection?