Cisco 2800 Password Recovery Failed

[Maddin B]

I wanted to do with my Cisco 2800, a password recovery.

I have read the instructions and Cisco just came up at six.

Complete these steps in order to recover your password:

1. Shut down the router.

2. Remove the compact flash that is at the back of the router.

3. Power on the router.

4. Once the Rommon1> prompt appears, enter this command:

   confreg 0x2142

5. Insert the compact flash.

6. Type reset.

BUT

I had forgotten to plug the flash card.

And now comes via console hieroglyphics only

[Ivan Shirshin]

Hi,

Try to change the speed in terminal and see if that helps.

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.