Cisco 2901 Wan Interface

[syed.shameem1]

Dear All,

We've have a client who had a ordered 2 units of 2901 router to have site to site connectivity. User has bought a leased line of 256kbps from service provider in between two sites, but the issue is the service provider has layed a rj11 cable and there is no rj11 interface on 2901 router it only has two rj45. kindly advise what can be done on is this situation..

Thanks,

Syed

[paolo bevilacqua]

Ask telco which exact type of interface have provided.

As there is not 256K circuit with RJ11 interface.

[syed.shameem1]

Thanks for reply Paolo,

It is a Rj11 cable with only one pair terminated

[paolo bevilacqua]

syed.shameem1 wrote:
Thanks for reply Paolo,
It is a Rj11 cable with only one pair terminated

That is not a 256K circuit and is not an interface type.

Again: ask telco what exactly they gave you.

[viveknathmangalat33]

Should we add a slot?

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.html

thanks

VK

[paolo bevilacqua]

As per answer above, get a detailed answer from telco.