Hello Community,
I have 5 Cisco 3800 series routers:
Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(24)T2, RELEASE SOFTWARE (fc2)
And 3 Cisco 3800 series routers:
Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 15.1(4)M3, RELEASE SOFTWARE (fc1)
I see the commands for "shape" and "traffic-shape" in documents which are only avialable on my 12.x IOS.. what are the equlivant commands for shaping on the IOS 15.x?
Secondly, any Guidance/opinons/learned lessons on the best use of traffic-shape, rate-limit, bandwidth for traffic shapping Ethernet Circuits from CPE to WAN for Internet access?
Any issues with Class-Map/Policy-Map/cef/ for QoS rules when using Traffic Shapping. example if I say 40% of link, is that based upon the traffic shape or interface speed?
Really apprecaite any opinions on this and if an commands (not perfect, just direction) would be awesome.
Thank You
Michael