08-21-2019 01:38 PM - last edited on 04-21-2023 02:27 AM by Translator
Hello,
I have a 1GB connection from my DMZ network to the internet. It travels from the 1GB cisco switch to the 1GB Cisco 4431 router and then into the internet connection. I have this on 2 different sites. One of my sites is ok and i can get download speeds of up to 800mb. But the other site is only getting around 400mb.
My reseller is now saying i only bought a 1GB license for the cisco 4431 and that i should have bought a 2GB license is a synchronous license instead of asynchronous
This is what is showing under
show run config
router#
license udi pid ISR4331/K9
license boot level appxk9
any ideas if he is correct as i have never heard of this before
But as i say its working fine at one site and both routers are identical with the same licenses
thanks in advance,Kevin
Solved! Go to Solution.
08-21-2019 05:58 PM
The ISR 4431 has a base thoughput of 500Mb/s. You'll need to buy a licence to lift that to 1Gb/s.
08-21-2019 05:59 PM - last edited on 04-21-2023 02:37 AM by Translator
ps. Use the below command to confirm which performance licence you have installed.
sh platform hardware throughput level
08-22-2019 01:08 AM - last edited on 04-21-2023 02:40 AM by Translator
Your right
sh platform hardware throughput level
The current throughput level is 500000 kb/s
looks like i have to think about a new license
thanks for your help
08-22-2019 01:07 PM
>The 1Gb licenses are asynchronous, not 1Gb each way.
>
>Does that mean i have 500mb up and 500mb down
It means the total throughput in both directions can not exceed 1Gb/s. So you could download 800Mb/s and upload 200Mb/s and be ok. Just the some of the up and downstream can not exceed 1Gb/s at any particular moment in time.
08-21-2019 05:58 PM
The ISR 4431 has a base thoughput of 500Mb/s. You'll need to buy a licence to lift that to 1Gb/s.
08-21-2019 05:59 PM - last edited on 04-21-2023 02:37 AM by Translator
ps. Use the below command to confirm which performance licence you have installed.
sh platform hardware throughput level
08-22-2019 01:08 AM - last edited on 04-21-2023 02:40 AM by Translator
Your right
sh platform hardware throughput level
The current throughput level is 500000 kb/s
looks like i have to think about a new license
thanks for your help
08-22-2019 07:18 AM - last edited on 04-21-2023 02:38 AM by Translator
Hello, just one more question
Here is my output
sh platform hardware throughput level
The current throughput level is 1000000 kb/s
But the supplier is saying
The 1Gb licenses are asynchronous, not 1Gb each way.
Does that mean i have 500mb up and 500mb down
What do you think?
08-22-2019 01:07 PM
>The 1Gb licenses are asynchronous, not 1Gb each way.
>
>Does that mean i have 500mb up and 500mb down
It means the total throughput in both directions can not exceed 1Gb/s. So you could download 800Mb/s and upload 200Mb/s and be ok. Just the some of the up and downstream can not exceed 1Gb/s at any particular moment in time.
08-22-2019 01:58 PM
Excellent answer - that explains what i am seeing in my speed test results
I know i have a line fault at one site because i cannot get over 400mb but at the other site i can range from 600 to 800
much appreciated
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide