cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
848
Views
0
Helpful
2
Replies

Cisco 540 and issue with ZTP process

zillah2004
Level 1
Level 1

Dear Experts

I am doing installation of a NCS 540 for a Teleco part of the installation is loading IOS and Config file (sit specific) using Zero Touch Process (Using Oracle VM Virtual Box and Google chrome)

When the process is completed the attached message pops up

https://imgur.com/a/YabGJiK

And the attached log as per Teleco guide line or cheat sheet

@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T21:20:03.356058+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:09:53,104", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586593.104216", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"104", "levelName":"INFO", "message":"About to start ztp process"}
@#@#@#@#
2020-10-01T21:20:13.365817+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:03,113", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586603.113803", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"113", "levelName":"INFO", "message":"X001 - Starting ZTP Process"}

2020-10-01T21:20:13.365817+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:03,114", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586603.114120", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"114", "levelName":"INFO", "message":"Debugs enabled"}

2020-10-01T21:20:13.365817+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:03,114", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586603.114306", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"114", "levelName":"INFO", "message":"Waiting 30s for boot"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T21:20:43.395546+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:33,142", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586633.142500", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"142", "levelName":"INFO", "message":"X002 - Waited long enough.. continuing"}

2020-10-01T21:20:43.395546+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:33,142", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586633.142852", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"142", "levelName":"INFO", "message":"Checking firmware and platform"}
@#@#@#@#@#@#@#@#
2020-10-01T21:21:02.204710+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:51,951", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586651.951411", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"951", "levelName":"INFO", "message":"Current version: 6.6.25"}

2020-10-01T21:21:02.204710+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:51,951", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586651.951746", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"951", "levelName":"INFO", "message":"Current label: None"}

2020-10-01T21:21:02.204710+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:51,952", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586651.952043", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"952", "levelName":"INFO", "message":"Current platform: NCS-540"}

2020-10-01T21:21:02.205284+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:51,952", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586651.952304", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"952", "levelName":"INFO", "message":"Golden ISO needs to be installed"}

2020-10-01T21:21:02.205284+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:10:51,952", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586651.952543", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"952", "levelName":"INFO", "message":"Attempting to apply 'hw-module profile qos hqos-enable' command"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T21:21:39.084160+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:11:28,830", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586688.830997", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"830", "levelName":"INFO", "message":"applied 'hw-module profile qos hqos-enable' command"}

2020-10-01T21:21:39.084160+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:11:28,831", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601586688.831253", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"831", "levelName":"INFO", "message":"attempting to install add GISO image"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T21:28:23.805691+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:18:13,544", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601587093.544993", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"544", "levelName":"INFO", "message":"Install Add Success, continuing to activate"}

2020-10-01T21:28:23.805691+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:18:13,545", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601587093.545672", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"545", "levelName":"INFO", "message":"attempting to install activate GISO image"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T21:59:34.816726+00:00 192.168.0.179 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 21:49:24,554", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601588964.554897", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"554", "levelName":"INFO", "message":"Install Activate Success, device rebooting soon"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T22:13:37.457972+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:03:27,036", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589807.036281", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"36", "levelName":"INFO", "message":"About to start ztp process"}
@#@#@#@#
2020-10-01T22:13:47.467760+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:03:37,045", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589817.045637", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"45", "levelName":"INFO", "message":"X001 - Starting ZTP Process"}

2020-10-01T22:13:47.467760+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:03:37,045", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589817.045980", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"45", "levelName":"INFO", "message":"Debugs enabled"}

2020-10-01T22:13:47.467760+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:03:37,046", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589817.046184", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"46", "levelName":"INFO", "message":"Waiting 30s for boot"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T22:14:17.498682+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:07,076", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589847.076375", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"76", "levelName":"INFO", "message":"X002 - Waited long enough.. continuing"}

2020-10-01T22:14:17.498682+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:07,076", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589847.076703", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"76", "levelName":"INFO", "message":"Checking firmware and platform"}
@#@#@#@#@#@#@#@#
2020-10-01T22:14:36.053935+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:25,631", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589865.631289", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"631", "levelName":"INFO", "message":"Current version: 6.6.25"}

2020-10-01T22:14:36.053935+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:25,631", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589865.631572", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"631", "levelName":"INFO", "message":"Current label: 6.6.25-version3"}

2020-10-01T22:14:36.053935+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:25,631", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589865.631794", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"631", "levelName":"INFO", "message":"Current platform: NCS-540"}

2020-10-01T22:14:36.053935+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:25,631", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589865.631966", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"631", "levelName":"INFO", "message":"X004 - Firmware is good"}

2020-10-01T22:14:36.053935+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:04:25,632", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589865.632124", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"632", "levelName":"INFO", "message":"attempting to install commit"}
@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#@#
2020-10-01T22:15:38.296871+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:27,874", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589927.874082", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"874", "levelName":"INFO", "message":"X005 - install commit done"}

2020-10-01T22:15:38.297763+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:27,874", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589927.874787", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"874", "levelName":"INFO", "message":"X006 - HW-MODULE fpds are good"}
@#@#@#@#@#
2020-10-01T22:15:50.183923+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:39,761", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589939.761225", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"761", "levelName":"INFO", "message":"No RSA keys present, Creating..."}
@#@#@#@#@#@#
2020-10-01T22:16:04.187750+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,764", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589953.764856", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"764", "levelName":"INFO", "message":"X007 - rsa key created"}

2020-10-01T22:16:04.187750+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,765", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589953.765126", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"765", "levelName":"INFO", "message":"Starting configuraton upgrade"}

2020-10-01T22:16:04.187750+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,765", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589953.765297", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"765", "levelName":"INFO", "message":"Downloading configuration"}

2020-10-01T22:16:04.230706+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,807", "pathName":"/pkg/bin/ztp_helper.py", "logRecordCreationTime":"1601589953.807843", "functionName":"download_file", "levelNo":"20", "lineNo":"183", "time":"807", "levelName":"INFO", "message":"Downloading file staged_config.config from URL:http://192.168.0.77/staging/staged_config.config"}

2020-10-01T22:16:04.232404+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,809", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589953.809942", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"809", "levelName":"INFO", "message":"X008 - Config download successfully "}

2020-10-01T22:16:04.232404+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,810", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589953.810241", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"810", "levelName":"INFO", "message":"File stored to /root/staged_config.config"}

2020-10-01T22:16:04.232729+00:00 192.168.0.180 Python: { "loggerName":"ZTPLogger", "asciTime":"2020-10-01 22:05:53,810", "pathName":"/disk0:/ztp/customer/config.candidate", "logRecordCreationTime":"1601589953.810454", "functionName":"log_info", "levelNo":"20", "lineNo":"224", "time":"810", "levelName":"INFO", "message":"X009 - Applying Config"}

Some routers change the generic name to a site specific name and show running-config shows it supposed to be

While other routers still showing generic name (sysadmin-vm:0_RP0#) has not been change to site specific name and show-running doesn’t show what it supposed to be !!!!!

Thanks

 

2 Replies 2

zillah2004
Level 1
Level 1

Thx George

 

I am following a document prepared by Telco and I guess not sure its modified one.

 

But I what I figured just now as I did a test on a lab router after ZTP process completed and before powering off the router I issued the show running config command everything is fine.

 

Then I switched off and switched on and then issue the show running-config nothing there ,,,,,,means configuration got lose

ZTP process supposed to save the configuration into NVRAM!!!

 

While other routers that I had used previously I didn't lost their configuration after shutdown means ZTP process had saved their configuration into NVRAM,,,,I don't why !!!

 

Now question Is still copy running config to startup config valid command ?

Review Cisco Networking for a $25 gift card