cisco 887vag-4g-lte publish openvpn server

[lucatek]

hi i need help to configure openvpn server bheind a c887vag-4g

my wan is on LTE 4G interface the openvpn server is on internal lan 10.10.x,x default gw for internal lan is 10.10.x.1

LTE interface have a static public ip A.B.C.D

many thanks for the help.

[balaji.bandi]

Atached some example guide to start with :

[lucatek]

thankyou for the reply BB

i think that i have not explained very weel wath i need to do.

i need to publish openvpn server (inside lan) via 4G LTE interface.

the interface works fine i'm in trouble with the nat configuration.

inside server ip is 10.10.x.10  default gw 10.10.x.1

wan interface is Cellular0 with a.b.c.d public ip

wath is the correct nat?

[balaji.bandi]

Ok no problem, post the current config ( show run)

as my understanding

remote users-----(internet cloud)------Provide( your LTE Router) ---(Open VPN Server)

You need NAT in router and ACL for the required ports example : open up ports TCP 443, 943 and UDP 1194

Example NAT :

ip nat inside source static 10.10.x.x A.B.C.D

[lucatek]

Hi BB

you understand correct.

Friday i'm on router and i can send you the sh run command

regards

[lucatek]

Hi BB

I have changed my idea and want to route all traffic to internal firewall ip 10.10.10.2

Attached to the post my router conf.

i'm newbie on cisco router 887

do you can help me to add the right conf.

regards