Cisco ASA Nat question

[maniac79]

I have an asa 5510 that I want to have two ports forwarded to an IP that is set as an object

I have

object network test-server

 nat (inside,outside) static interface service tcp 3399 3399

I also want the same object to forward port 1411 to that address but it won't let me add both, how can I do this?

Thanks

[maniac79]

Ended up just adding another network object with the same local IP and that did the trick. I'm sure there is a better way though.

[balaji.bandi]

You can group them if you like to simplify the objects.