05-26-2022 06:52 AM
Dear Cisco Community, and @Leo Laohoo,
I have to upgrade two Cisco ASR 1002-X Routers.
Current version is: asr1002x-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin (3.16.5S)
Version to upgrade to: asr1002x-universalk9.17.03.05.SPA.bin (17.3.5)
Current Rommon version is not shared by the client,
but rommon version to upgrade to should be the latest right now, right, i.e.
asr1000-rommon.173-1r.SPA.pkg - Release 17.3(1r)
1. Please check if all above links are correct.
2. Can I upgrade direct from above current version to suggested upgrade version i.e. from 3.16.5S to 17.3.5.
Or is there any upgrade path for this.
3. If there's any upgrade path, please do share the upgrade path for my current version to suggested version i.e. from 3.16.5S to 17.3.5 (and also the rommon software package).
4. Please share the upgrade steps.
5. Since this is IOS XE, like 3850 switch, do we have 2 types of upgrade in ASR routers too i.e. Bundle and Install mode.
6. If yes then please share upgrade steps for both.
Solved! Go to Solution.
05-26-2022
04:11 PM
- last edited on
05-26-2022
10:19 PM
by
Translator
Refer to this: Cisco ISR & ASR 1k Routers: IOS-XE/Firmware Upgrade (Install Mode)
Here are the steps:
packages.conf.
05-26-2022
04:11 PM
- last edited on
05-26-2022
10:19 PM
by
Translator
Refer to this: Cisco ISR & ASR 1k Routers: IOS-XE/Firmware Upgrade (Install Mode)
Here are the steps:
packages.conf.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide