Cisco CAP-2702I second WAN Interface?

[alexander2003]

Hello.
I have a Cisco 2702I access point, and would like to use the second LAN port as a second interface + wifi network.

Would this be possible in any way? I haven't found a way to do it, and I can' t find any documentation about it on the internet.

Thank you! Greetings Alex  

[balaji.bandi]

Looks at the guide line for AUX port :

Guidelines for Using the Auxiliary Ethernet Port

For Cisco Unified Wireless Networks Release 8.1.102.0 and older, the auxiliary Ethernet port labeled AUX is:

• A non-PoE port.
• Does not provide PoE Out.
• Provided for downward device connectivity only. The port is locally switched and is not managed. Spanning Tree Protocol (STP) is not enabled on this port.
•  You can connect the AP to end devices such as projectors, phones, Point of Sale Terminals and so on, through this port.
•  Do not connect another AP or devices such as switches or hubs to this port as they can create spanning loop problems. Also, do not connect the AUX port to the same uplink switch as the AP.

• Appears in the controller user interface as GigabitEthernet1.
• Disabled when using 802.3af (15.4W) power.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/2700/quick/guide/ap2700getstart.html#57921