Cisco ISR4451-X SNMP Bandwidth Monitoring

[SCTech]

Hello,

I need to monitor the bandwidth on a Cisco ISR4451-X router via SNMP. I am attempting to find the correct OID's as well as determine the alert threshold parameters. I have included a picture showing the available variables that can be included to setup the monitor.

This project was inherited and I am struggling with the network devices in particular, so any assistance is highly appreciated.

Thank you

[Joseph W. Doherty]

"Google" standard interface MIBs.  Likely you can get what you need there.

Beyond that, you'll  need to obtain the Cisco MIBs for your IOS, which should provide all the additional vendor OIDs.

[balaji.bandi]

check below document :

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/26007-faq-snmpcounter.html

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/8141-calculate-bandwidth-snmp.html