cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
765
Views
0
Helpful
5
Replies

Cisco ME3600x Switch Local user Credential not accepting

Zain Khan
Level 1
Level 1

Hi,

 

i am using Cisco ME3600x switch, when i user command login local its not accepting password while logout, also whenever I create local user like

 

Conf# username test privilege 3 password test

 

it doesn't login/accept the credentials. can anyone suggest what could be the possibility 


Zain Khan
https://www.linkedin.com/in/forzain/
5 Replies 5

johnd2310
Level 8
Level 8

Hi,

 

What is your aaa configuration?

 

Thanks

John

**Please rate posts you find helpful**

no aaa new-model

 

i am creating users on Switch 


Zain Khan
https://www.linkedin.com/in/forzain/

hi,

just to clear, you're issuing the command in global config mode?

Switch(config)#username <USER> privilege <LEVEL> secret <PW>

kindly post the exact command and error you get.

Hi @johnlloyd_13

 

yes i am issuing in Global Config Mode and the same command that you mentioned

 

there is no error the thing is whenever i created any user like 

Switch(config)#username <TEST> privilege <5> secret <TEST123>

and logout for verification and i entered the created username password it does not login into the switch 


Zain Khan
https://www.linkedin.com/in/forzain/

hi,

how do you login? console or via SSH?

you'll need to 'login local' under line config (if you're not using AAA):

line con 0

login local

 

line vty 0 4

login local

Review Cisco Networking for a $25 gift card