08-23-2024 09:16 PM - edited 08-23-2024 09:18 PM
hi,
i got a cisco NCS540 and would need to import/export or do a "route leaking" between two VRFs.
this is the config in an IOS-XE router:
ip vrf SDWAN
rd 65000:210
route-target export 65000:210
route-target import 65000:210
route-target import 65000:209
can someone confirm which config is the correct or should use in IOS-XR?
vrf SDWAN
rd 65000:210
address-family ipv4 unicast
import route-target 65000:210
import route-target 65000:209
export route-target 65000:210
OR
vrf SDWAN
rd 65000:210
address-family ipv4 unicast
import route-target 65000:209
route-target export 65000:210
Solved! Go to Solution.
08-23-2024 10:10 PM
Hi @johnlloyd_13 ,
This would be the correct IOS-XR format:
vrf SDWAN
rd 65000:210
address-family ipv4 unicast
import route-target 65000:210
import route-target 65000:209
export route-target 65000:210
Regards,
08-23-2024 10:10 PM
Hi @johnlloyd_13 ,
This would be the correct IOS-XR format:
vrf SDWAN
rd 65000:210
address-family ipv4 unicast
import route-target 65000:210
import route-target 65000:209
export route-target 65000:210
Regards,
08-23-2024 11:36 PM
thank you sir! appreciate it
08-24-2024 06:22 AM
You are very welcome @johnlloyd_13 and thanks for the feedback
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide