Cisco Nexus 7000 F2-series modules do they support OTV

[robert.jubb]

We have purchased F2 modules is there anything anywhere which confirms F2 will support OTV i can only find the below about F1 modules  - please point me the correct diriction to cisco documentations regarding F2 modules and OTV

Q. What modules of the Cisco Nexus 7000 Series will support OTV?

A. OTV is supported on all M-series modules. OTV is not supported on F1-series modules. Deployments using F1 series can leverage VDC separation to achieve the desired combination of line cards and functionality.

[p.mcgowan]

OTV is not supported in F2 modules, this is described in the NX-OC v6.0 release notes.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/release/notes/60_nx-os_release_note.html#wp423808

The F2 series hardware does not support OTV so this feature will remain unavailabe in future relases on F2 series modules.

Hope this helps.

Please rate if helpful