09-20-2021 11:56 AM
What would be a good Cisco replacement for a dLink DSR-500N wireless service router. I'd want it to support VPN and IP/phones.
Thanks
GlennRA
Solved! Go to Solution.
09-21-2021 08:00 AM
Hello,
yes, you can use both WAN interfaces at the same time by configuring load balancing:
Configure WAN Load Balancing on RV34x Series Router
Which IP phones do you have ? Cisco IP phones require CDP (which this router can obviously understand)...
09-21-2021 12:48 AM
Hello,
here is a suggestion
:Cisco RV132W ADSL2+ Wireless-N VPN Router
https://www.cisco.com/c/en/us/products/routers/rv132w-adsl2-plus-wireless-n-vpn-router/index.html
09-21-2021 07:53 AM
My WSR deployment is under a Spectrum provided modem/router that interfaces Spectrum/ISP. I was thinking about the Cisco RV340W but have a few questions: -will it support IP phones (what protocol is needed for such)? Can i do any kind of port aggregate on the dual WANs to increase bandwidth (dual ISPs) or is it just redundancy?
09-21-2021 08:00 AM
Hello,
yes, you can use both WAN interfaces at the same time by configuring load balancing:
Configure WAN Load Balancing on RV34x Series Router
Which IP phones do you have ? Cisco IP phones require CDP (which this router can obviously understand)...
09-21-2021 08:41 AM
I don't have a Cisco/ipPhone deployment yet; i want to integrate such, however, i wanted to make sure the WSR replacement would do that. So, the RV340W will support Cisco's ipPhone solutions; right?
09-21-2021 09:36 AM
Hello,
definitely.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide