03-11-2012 10:17 PM - edited 03-04-2019 03:37 PM
Hi all,
I have issues to connect Cisco 2911 to HP switch. I disable CDP on the LAN port, router at A end is ok, but the unknow protocal drops as same as before at B site. It happend around every 30sec. When I transfer a file from one end to the other end. It always disconnect every 25 second. HP Switch is not configure trunk as it work as a plain network
Any other issues is possible?
03-12-2012 06:29 AM
Unknow protocol drops normal. thye are the SPT packets from switch, and are not the cause of your problem.
03-12-2012 11:57 PM
Hi Paolo,
Thanks for the reply, but my issue is package seems dropped when we try to transfer file from PC A to B. When we check router, only this error shows. And two site are using same switch and same config. Only Site B shows this error, site A is fine. Except this issue, is there any other things i should try to troubleshoot?
Thanks
03-13-2012 06:24 AM
Hi, recommend you engage a reputable consultant, or certified Cisco partner, or Cisco TAC to help you resolve this issue.
Otherwise you have to provide a lot more data / evinde tof the problem.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: