cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
777
Views
0
Helpful
3
Replies
Texas Hare
Beginner

[Cisco7613] I can't enter the PortAdapter Module CPU by using "attach" command.

I have been using the Cisco7613 and FlexWAN with PA-8E1-IMA PortAdapter.

It has been used for ITP (SIGTRAN)

Today, I attemted to enter the PorAdapter 13 1 module with using command that "attach" command.

SG10#attach 13 1

But I couldn't that. and I could see the Error Message below.

" RTTYC_ATTACH_REQ Failed with return code 2 , aborting "

What's mean this message? and what is this mean?

This Module (13 1) is working normal. but why cannot enter to the PA ?

And what should i do?

My customer is wondering this symptoms.

Help me.

3 REPLIES 3
lang-juergen
Beginner

Hello,

could you please post a "sh module" from the box?

Br Jürgen

Thankyou for reply.

Here are "show module" part of log below -

SG10#show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1038BVGA
  2    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1038BVG7
  3    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1038BVGR
  4    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1038BKVH
  5    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1217FTOR
  6    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1217FYQ2
  7    2  Supervisor Engine 720 (Hot)            WS-SUP720-3BXL     SAL1113KBWD
  8    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL     SAD1208028V
  9    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1115CWQ7
10    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1217FTMV
11    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE1217FTOM
12    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE11506FQI
13    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA       JAE11506EU2

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  0019.2f2c.c160 to 0019.2f2c.c19f   2.3   12.2(2009060 12.2(2009060 Ok
  2  0019.2f2c.c020 to 0019.2f2c.c05f   2.3   12.2(2009060 12.2(2009060 Ok
  3  0019.2f2c.c0e0 to 0019.2f2c.c11f   2.3   12.2(2009060 12.2(2009060 Ok
  4  0019.2f2c.bce0 to 0019.2f2c.bd1f   2.3   12.2(2009060 12.2(2009060 Ok
  5  0021.552e.89c0 to 0021.552e.89ff   2.3   12.2(2009060 12.2(2009060 Ok
  6  0021.552e.5cc0 to 0021.552e.5cff   2.3   12.2(2009060 12.2(2009060 Ok
  7  0016.4708.2500 to 0016.4708.2503   5.3   8.4(2)       12.2(2009060 Ok
  8  0017.944a.b6d4 to 0017.944a.b6d7   5.6   8.5(2)       12.2(2009060 Ok
  9  0019.e843.0d40 to 0019.e843.0d7f   2.3   12.2(2009060 12.2(2009060 Ok
10  0021.5583.39c0 to 0021.5583.39ff   2.3   12.2(2009060 12.2(2009060 Ok
11  0021.552e.73c0 to 0021.552e.73ff   2.3   12.2(2009060 12.2(2009060 Ok
12  001e.4a4c.ee50 to 001e.4a4c.ee8f   2.3   12.2(2009060 12.2(2009060 Ok
13  001a.a106.6380 to 001a.a106.63bf   2.3   12.2(2009060 12.2(2009060 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  7  Policy Feature Card 3       WS-F6K-PFC3BXL     SAL1113KDXY  1.8    Ok
  7  MSFC3 Daughterboard         WS-SUP720          SAL1113KCD1  2.6    Ok
  8  Policy Feature Card 3       WS-F6K-PFC3BXL     SAD120706A0  1.8    Ok
  8  MSFC3 Daughterboard         WS-SUP720          SAD120806JB  3.1    Ok

Mod  Online Diag Status
---- -------------------
  1  Pass
  2  Pass
  3  Pass
  4  Pass
  5  Pass
  6  Pass
  7  Pass
  8  Pass
  9  Pass
10  Pass
11  Pass
12  Pass
13  Pass

Hi,

to connect to a specific hw-module, in your case module 13 please try ...

7613#attach 13
Trying Switch ...
Entering CONSOLE for Switch
Type "^C^C^C" to end this session


7613-cfc13#

I hope, i could help you ... please let me know !

Br

Jürgen