Clocking Help

[Yort Mantup]

                   Looking for some assistance in setting up clocking correctly for the following setup:

(4) T1's - serial 0/0/0, 0/0/1  --  0/2/0, 0/2/1

(1) PRI 0/1/1

Currently its configured like this which can't be correct because there is no working connection in 0/1/0

clock timezone EST -5

clock summer-time EDT recurring

network-clock-participate wic 0

network-clock-participate wic 1

network-clock-participate wic 2

network-clock-select 1 T1 0/1/0 clock timezone EST -5

Thanks

[paolo bevilacqua]

Then configure another source. However for data connections it is not extremely important.

[Jeff Van Houten]

But for pri it is. Change the select statement to 0/1/1.

Sent from Cisco Technical Support iPad App