Compatibility between VS-S720-10G-3C and VS-S2T-10G

[Vinh Phan Le Tien]

Dear friend

My customer is running Catalyst 6500 with dual-supervisor VS-S720-10G-3C and one supervisor was fail.

VS-S720-10G-3C was EoS at 31 Jul and the replacement is VS-S2T-10G.

Can we use 2 types of module in one chasis for redundant or we must replace old supervisor (VS-S720) with 2 new supervisor.

Thanks.

Vinh Phan Le Tien

[Leo Laohoo]

Can we use 2 types of module in one chasis for redundant or we must replace old supervisor (VS-S720) with 2 new supervisor.

Not possible.  The supervisor must be of the same model (and DFC/PFC).  

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

I think you can mix XL and non-XL supervisor variants, of the same model.