Configuring HWIC-8A on 2911 Router

[pstojanovski]

Hey everyone,

I had purchased a HWIC-8A in an effort to provide terminal server capabilities into multiple routers. I had found a document that I thought would take me through the configuration but it doesn't appear that the command syntax is the same on the 2911's as it is in the document. Does any know how I would need to get this configured on the 2911 router?

Here is the document I was referencing

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml

I appreciate the advice and help.

[paolo bevilacqua]

And what commands would be different ?

[pstojanovski]

For the ip host command, i'm trying to figure out the the ports 0/0/0-7 on the router translate to the numerical values listed in the document.

ip host 3600-2 2013 172.21.1.1

[Richard Burts]

Paul

I have not configured a terminal server on 2900 routers and there may be some differences that I do not clearly understand. But it is my understanding that the port numbers in the ip host command are in the form of 20xx where the xx are the line numbers 0/0/0 through 0/0/7 (2001, 2002, 2003, etc)

HTH

Rick

Sent from Cisco Technical Support iPhone App