Connecting 2 Cisco 2960s with SFP

[elroykhlo]

Hi All,

  Recently, I am going to connect 2 Cisco 2960s with Fibre at different floors. Do it need any configuration for connecting 2 switch with fibre and SFP module?

Many Thanks

Best Regards,

Elroy

[jwood]

Will other be multiple vlans that we be used on these switches?


Sent from Cisco Technical Support Android App

[elroykhlo]

Thanks for your quick reply. For my network diagram, is that I will create a VLAN as an external switch to connect between the external router and the firewall. For the rest of switch will share same VLAN for client connection.

Many Thanks

Best Regards,

Elroy

[paul driver]

Hello

Give each switch an svi interface and default-gateway (for management purposes)
Trunk interface between the two switches to carry the vlans.

Res
Paul



Sent from Cisco Technical Support iPad App

[Jeff Van Houten]

Is be we not it figured what asked?

Sent from Cisco Technical Support iPad App

[paul driver]

Hello Jaff,

I dont understand your question?

res

Paul

Please don't forget to rate any posts that have been helpful.

Thanks.

[elroykhlo]

Hi,

thanks for your reply. Sorry for my limited knowledge, may I ask more about svi interface? And even my client connection share same default VLAN. It is also needed to trunk the SFP port?

Thanks

Best Regards,

Elroy