Good Morning.
I've got a question on how to combine subnets. I have 3 small closed networks, all utilzing a ip range of 192.168.1.xxx
These networks have no "outside" connectivity to the world and are located in 3 seperate physical locations.
To allow me to manage the applications and such that run on these networks, I am going to bring dedicated connections into a single location so that I can access these networks remotely.
Currently, I have a Point to point T1 connecting me to one network and I utilize Cisco 1841's on either end of that. However, I will pull fiber for connectivity to the other two nets. Both buildings are withing 500 feet of me.
What I want is to have all 3 networks have a Cicso router at the "network" end and a single router in my lan room that connects to all 3. Then, I want to be able to have one or more PC's to be able to connect to any of the 3 networks as needed.
Any thoughts as to the best method to implement this? I think the router side is pretty straight forward, but the PC connectivity is stumping me for the moment.
I'm thinking I can use the routing table and mac addresses of my machines, but I'm not sure.
Thanks
Bob