06-02-2021 04:16 AM
in FMC using flex config there is an example and it works
PRB-HR 192.168.1.2 MY-GW-1 192.168.100.1
PRB-IT 192.168.5.2 MY-GW-2 192.168.200.1
route-map $ Route-MAP-Name resolution 10
set ip next-hop verify-availability $ GW-1 1 track 1
set ip next-hop verify-availability $ GW-2 2 track 2
route-map $ resolution Route-MAP-Name 20
set ip next-hop verify-availability $ GW-2 1 track 1
set ip next-hop verify-availability $ GW-1 2 track 2
interface Port-channel 4.3
policy-route $ Route-MAP-Name
interface Port-channel 4.6
policy-route $ Route-MAP-Name
Now
I need to configure everything through FDM
can't create route map in FDM
please write how to create a route map in FDM
or give a customization example
Google could not find examples
06-02-2021 04:47 AM
This is not yet possible through native FDM configuration. As with FMC, you have to go through FlexConfig which is quite similar to what you have seen in the FMC-documentation:
07-01-2021 09:23 PM
07-07-2021 08:57 PM - edited 07-07-2021 09:53 PM
created in object acl and route-map
access-list acl-isp2 standard permit host 192.168.1.2
route-map pbr-isp2 permit 10
match ip address acl-isp2
match interface vlan-id-3
set ip next-hop 31.31.31.31
Where
vlan-id-3 sub-interfce (192.168.1.0/24)
31.31.31.31 - second isp2
everyone goes through isp1 and host 192.168.1.2 must go through isp2
does not work, which is not correct in such a configuration?
do i need to use flex object and how to do it?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide