05-18-2013 01:29 PM - edited 03-04-2019 07:56 PM
Hi guys,
If someone can please share a link this would be great on the topic of site to site IPSEC VPN using routers and default routing.
I have three routers, router A,B,and C.
A and B are connected over an MPLS and C is on the internet.
B and C are connected over a site to site IPSEC tunnel and now I want to advertise from C to B the default route only.
A has sent all of the routes B needs for the subnets over the MPLS but now I want to push the default route 0/0 to the IPSEC tunnel and come out of the C router.
Thanks in advance
Regards,
Juan
Solved! Go to Solution.
05-18-2013 11:38 PM
You need a GRE tunnel to do that, not IPSEC.
05-18-2013 11:38 PM
You need a GRE tunnel to do that, not IPSEC.
05-19-2013 10:56 AM
ok great yes I know that but I was wondering if I can source route my LAN to use the remote Cisco router as the default gateway for internet using RRI but probably not and GRE or DMVPN is the way to go but I will wait for your reply on this.
thanks again for your response.
Kind regards,
Juan
05-19-2013 01:50 PM
As above, use GRE.
Thank you for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide