02-23-2006 05:03 AM - edited 03-03-2019 11:50 AM
Hi.
I am trying to configure my CATALYST 3750 as a DHCP Server.
I need to configure a STATIC DHCP binding between a MAC and a IP address.
I had configure the follow but the PC (winXP)does not get the address from the switch.
With a sniffer I see the DHCP request but there is No reply.
The configuration is:
service dhcp
ip dhcp pool test
host 1.x.1.x.0.0.0
client-identifier 0002.8a96.9fba
default-router 1.1.1.254
what am I missing???
THANKs
02-23-2006 05:29 AM
Hi,
Have you configured a VLAN (routed) interface on the switch with a 1.1.1.x address ?
Paresh
02-23-2006 05:42 AM
Hello,
Microsoft Windows clients require a slight change to the client-identifier, which is prepending a '01' for Ethernet. You might want to try the following:
service dhcp
ip dhcp pool test
host 1.1.1.5 255.0.0.0
-->client-identifier 0100.028a.969f.ba
default-router 1.1.1.254
Regards,
Nethelper
02-23-2006 06:40 AM
used debug ip dhcp, to see if your cisco switch heard the dhcp request.
Regards.
02-23-2006 07:35 AM
Yes,
The switch receives the DHCP request, it can be seen using the debug DHCP and also using a sniffer.
02-23-2006 07:31 AM
I had try it, did not help.
Any other idea?
02-23-2006 07:33 AM
Yes.
interface vlan 1 has the ip address of 1.1.1.254 /8
enabled.
02-23-2006 08:07 AM
Hello,
can you post the full configuration of the switch, and indicate on which port the client is connected to which the static binding has to be go ?
Regards,
Nethelper
02-25-2006 11:50 PM
02-25-2006 11:38 PM
YES, interface vlan 1 is enabled.
02-26-2006 09:19 PM
Could you post "show vlan bri" and "show int f--"
Thanks
02-26-2006 09:19 PM
Could you post "show vlan bri" and "show int f--"
Thanks
10-29-2006 06:26 AM
Hi
Did you resolve this problem...did you upgrade your IOS because I think there is a bug...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide