DHCP won't load

[Cisco__guy]

Hello guys,

i just configured one Router and activated the DHCP, somehow when i connect device to this router it doesn't recieve IP from the router

its comes with 192.16.0.0 and Gat 255.255.0.0

please find the below is my DHCP settings from the config file

no ip dhcp use vrf connected

ip dhcp excluded-address 10.129.1.113

!

ip dhcp pool aPool

  network 10.129.1.112 255.255.255.240

  default-router 10.129.1.113

  dns-server 10.64.20.59 10.64.20.60

thank you for helping me fix this problem

[Cisco__guy]

the extra line is for VPN thank you

wihtout this i'll can't create the tunnel using this modem,

[p.mcgowan]

hi peter,

In the line of the access-list which you are trying to add there appears to be an additional digit which is causing the problem.

you are trying to add the following;

access-list 101 permit ip 10.129.1.192 2 0.0.0.15 any

the digit I have highlighted here is causing the problem, you do not need this

enter the following;

access-list 101 permit ip 10.129.1.192 0.0.0.15 any

Hope this helps

[johnlloyd_13 · Accepted solution]

Hi Peter,

Can do a copy and paste for this particular line in order to prevent typo error?

Sent from Cisco Technical Support iPhone App

[Cisco__guy]

yes i did already

its add all the line beside the access-list 101

i am doing something wrong?