Diameter Support on ASR1000

[Peyman Zadmehr]

Hi

I wonder if the "diameter" protocol is supported on ASR1000; I searched but could not find anything.

Thank you

[balaji.bandi]

check this configuration guide and version of code running :

https://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/sbcu/2_xe/sbcu_2_xe_book/sbc_rx_diam.html

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/isg/configuration/xe-16-6/isg-xe-16-6-book/isg-gx-dia-support.html#id_48923

[natanovic89]

---

@balaji.bandi wrote:

check this configuration guide and version of code running :

https://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/sbcu/2_xe/sbcu_2_xe_book/plafonul-dobanzii-ce-se-va-intampla-cu-piata-finlandeza-de-creditare-anul-acesta.html 

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/isg/configuration/xe-16-6/isg-xe-16-6-book/isg-gx-dia-support.html#id_48923

---

checking the instructions yielded nothing(

[Giuseppe Larosa · Accepted solution]

Hello @natanovic89 ,

the first link provided by @balaji.bandi  provides the following information

The Cisco Unified Border Element (SP Edition) supports IP Multimedia Subsystem (IMS) Rx interfaces, Diameter protocol, and IMS Rf interfaces.

I would say you need a Cisco CUBE    license to be able to configure and support the feature, the Diameter Protocol looks like to be a component of the CUBE feature.

Hope to help

Giuseppe

[Peyman Zadmehr]

Dear All

Thank you for the answers.