DSL Line security Config

[Patrick McHenry]

Hi,

I configured a 1841 router that connects to a DSL modem. This DSL connection is our Internet connection for vendor and IT testing.

I have connectivity to the Internet using nat and have configured the router to act as a DHCP server. It seems to be working fine. I just want to configure some best practices for securing the device from the outside access. Is there some standard best practices I should be configuring?

Thank you.

[Reza Sharifi · Accepted solution]

Pat,

Have a look at this doc for best practice.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml

HTH

[Patrick McHenry]

Thanks Reza.