Dual internet implementation with Router

[mrochac]

Good day everyone, i need some advice on best practice for the following scenario;

- we have 2 CE routers ISP owned providing MPLS access to our WAN

- we would like to install 2 routers and load balance between them which should also provide redundancy

any help is great appreciated.

[balaji.bandi]

Look at good example for reference :

https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html#anc15

[Georg Pauwen · Accepted solution]

Hello,

in addition to Balaji's post the below is also a good collection of sample configs:

http://showipbgp.com/bgp-configurations/cisco.html

[paul driver]

Hello

if you already have ce rtrs then the resiliency is already being provided -  a High end L3 switch (stackwise virtual or vss) running an igp such has ospf or floating static routes  would be applicable 

On the basis what you have posted regards your design at present i would say you really don’t need rtrs unless you have a specific requirement for them.