cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
164
Views
15
Helpful
3
Replies
Beginner

Dual internet implementation with Router

Good day everyone, i need some advice on best practice for the following scenario;

 

- we have 2 CE routers ISP owned providing MPLS access to our WAN

- we would like to install 2 routers and load balance between them which should also provide redundancy

 

any help is great appreciated.

 

 

 

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Mentor

Re: Dual internet implementation with Router

Hello,

 

in addition to Balaji's post the below is also a good collection of sample configs:

 

http://showipbgp.com/bgp-configurations/cisco.html

3 REPLIES 3
VIP Advisor

Re: Dual internet implementation with Router

Look at good example for reference :

 

https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html#anc15

 

BB
*** Rate All Helpful Responses ***
VIP Mentor

Re: Dual internet implementation with Router

Hello,

 

in addition to Balaji's post the below is also a good collection of sample configs:

 

http://showipbgp.com/bgp-configurations/cisco.html

VIP Advisor

Re: Dual internet implementation with Router

Hello

if you already have ce rtrs then the resiliency is already being provided -  a High end L3 switch (stackwise virtual or vss) running an igp such has ospf or floating static routes  would be applicable 

 

On the basis what you have posted regards your design at present i would say you really don’t need rtrs unless you have a specific requirement for them.

 

 



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards