ā11-28-2018 09:56 AM - edited ā03-05-2019 11:05 AM
Dear all ,
I would like to ask duplicate question.
I would like to clear eBGP and DMVPN.
May i know can we use eBGP as both of under lay protocol and overlay protocol ?
I mean i will eBGP to peer with ISP and also use again as routing for DMVPN . May know it will double BGP ? That double usage will be conflict ? because underlay is bgp and overlay is also bgp in Same AS.is it recommend ?
i always see underlay is bgp and overy is EIGRP.
Solved! Go to Solution.
ā11-28-2018 10:41 AM
Hello,
you can use (e)BGP as the only protocol. Have a look at the below sample config (this is for Phase 3):
https://networklessons.com/cisco/ccie-routing-switching/dmvpn-phase-3-bgp-routing/
ā11-28-2018 10:41 AM
Hello,
you can use (e)BGP as the only protocol. Have a look at the below sample config (this is for Phase 3):
https://networklessons.com/cisco/ccie-routing-switching/dmvpn-phase-3-bgp-routing/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide