eigrp summary administrative distance

[Lassek]

Hi

When creating an EIGRP summary it will automatically install on the local routing table a route to Null0, this route has an AD of 5.

Is there a command that will display this AD of 5 anywhere?

It's just out of curisity

Cheers

Lasse

[David Ruess]

Hello,

You should be able to see it in the routing table.

You might have to specify the summary address appended to the command.

Ex: show up route <summary address/mask>

R#sh ip route 172.16.0.0 255.255.254.0 Routing entry for 172.16.0.0/23 Known via "eigrp 1", <strong>distance 5</strong>, metric 28160, type internal Redistributing via eigrp 1 Routing Descriptor Blocks: * directly connected, via Null0 Route metric is 28160, traffic share count is 1 Total delay is 100 microseconds, minimum bandwidth is 100000 Kbit Reliability 255/255, minimum MTU 1500 bytes Loading 1/255, Hops 0

Hope that helps.

[MHM Cisco World]

AD default is 5

Show ip route summary address <-in the router generate the summary 

summary-metric summary address distance X <- this change the default to any AD you want.

[Lassek]

Thanks that's what I needed

I forgot about that command