Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
997
Views
0
Helpful
3
Replies

Eliminate existing CSU/DSU device..

abdulrasheeth
Level 1
Level 1

‎05-24-2010 01:58 AM - edited ‎03-04-2019 08:34 AM

Hi,

Currently i am having a cisco 7513 router with FSIP controller connected to Paradyne Comsphere 3000 CSU/DSU via serial cable. The remote site is connected via T1 dedicated line and a small paradyne modem connects to cisco 2600 router. Now i am planning to use purely cisco devices and eliminate the paradayne CSU/DSU and the modems. What routers should i buy for HO and branch office with what interface cards?

Labels:
0 Helpful
3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

‎05-24-2010 03:25 AM

The smaller you can use is a 1841 with HWIC-1DSU-T1. However, a 1941 would be "better".

0 Helpful

abdulrasheeth
Level 1
Level 1
In response to paolo bevilacqua

‎05-24-2010 10:50 PM

Hi,

Thanks for your reply. Can i connect now the T1 directly to the router. Also can you brief about HWIC-1DSU-T1 and a sample configuration. Thank again in advance.

0 Helpful

abdulrasheeth
Level 1
Level 1
In response to abdulrasheeth

‎05-27-2010 04:34 AM

Hi,

Can you suggest some modules that can fit in 6500 switch for the above scenario?

0 Helpful
Customers Also Viewed These Support Documents